Conductive polymer composites from polylactic acid/Natural rubber filled with carbon black
In order to develop environmentally friendly conductive polymer composites, polylactic acid (PLA) was melt blended with natural rubber (NR), with addition of carbon black (CB) as the conductive filler. It was found that the PLA/NR blends were immiscible, and the sea-island and co-continuous morpholo...
Disimpan dalam:
| Pengarang-pengarang Utama: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Bahasa: | English English |
| Diterbitkan: |
2014
|
| Subjek-subjek: | |
| Capaian Atas Talian: | http://irep.iium.edu.my/41641/ http://irep.iium.edu.my/41641/ http://irep.iium.edu.my/41641/1/Yose_-_ICAMME_2014_-_Paper_ID_2159_-_Evidence.pdf http://irep.iium.edu.my/41641/3/ICAMME_2014_-_ID_2159.pdf |
| Penanda-penanda: |
Tambah Penanda
Tiada Penanda, Jadilah orang pertama menanda rekod ini!
|
| Ringkasan: | In order to develop environmentally friendly conductive polymer composites, polylactic acid (PLA) was melt blended with natural rubber (NR), with addition of carbon black (CB) as the conductive filler. It was found that the PLA/NR blends were immiscible, and the sea-island and co-continuous morphological structures were observed at PLA/NR with ratio of 80/20 vol% and 60/40 vol% respectively. Addition of CB to 60/40 PLA/NR matrix, brought the composites to become electrically
conductive at CB content of 2 phr. It was also found that the impact strength of PLA/NR/CB composite is better than that of the neat PLA. |
|---|