Dual-wavelength laser generation using highly concentrated erbium-doped fibre coupling with microfibre knot resonator
A dual-wavelength fibre laser is demonstrated using a 2 m-long erbium-doped fibre (EDF) with a microfibre knot resonator (MKR) structure at the output end. The MKR is fabricated by heating and stretching an EDF to form a microfibre with diameter of around 2 mm, which is then manipulated to create a...
Disimpan dalam:
| Pengarang-pengarang Utama: | , , , , |
|---|---|
| Format: | Artikel |
| Diterbitkan: |
2012
|
| Subjek-subjek: | |
| Capaian Atas Talian: | http://eprints.um.edu.my/10375/ http://eprints.um.edu.my/10375/1/Dual%2Dwavelength_laser_generation_using.pdf |
| Penanda-penanda: |
Tambah Penanda
Tiada Penanda, Jadilah orang pertama menanda rekod ini!
|
| Ringkasan: | A dual-wavelength fibre laser is demonstrated using a 2 m-long erbium-doped fibre (EDF) with a microfibre knot resonator (MKR) structure at the output end. The MKR is fabricated by heating and stretching an EDF to form a microfibre with diameter of around 2 mm, which is then manipulated to create a knot. At a loop diameter of 2 mm for the MKR, dual-wavelength laser is obtained at 1533.8 and
1555.4 nm with peak powers of 228.1 and 227.1 dBm, respectively. Both laser output is stable with a signal-to-noise ratio of more than 18.5 dB at room temperature. |
|---|