Development of hot stamping tool by using indirect hot stamping for basic bending part (u-shape)
In hot stamping process, (UHSS) blank was cut into the rough shape. The blank is then heated to the temperature (900 - 950 °C) for 5 to 10 minutes inside the furnace. Then, the blank must be transferred quickly to the press to avoid the part is cooled before forming. After that, the blank is formed...
Disimpan dalam:
| Pengarang-pengarang Utama: | , |
|---|---|
| Format: | Bulletin |
| Diterbitkan: |
2014
|
| Subjek-subjek: | |
| Capaian Atas Talian: | http://umpir.ump.edu.my/10805/ http://umpir.ump.edu.my/10805/1/DEVELOPMENT%20OF%20HOT%20STAMPING%20TOOL.pdf |
| Penanda-penanda: |
Tambah Penanda
Tiada Penanda, Jadilah orang pertama menanda rekod ini!
|