Design And Analysis Of Multi LED Machine Fixture Using Pneumatic System And PLC
In the 21st century, the LEDs become vast growing parts that replacing the signaling and lighting devices. The manufactures of LEDs play a major role for supporting vast amount of LEDs usage in various applications. The preparation of LEDs for production is important to reduce the total time cons...
Disimpan dalam:
| Pengarang Utama: | |
|---|---|
| Format: | Monograph |
| Diterbitkan: |
UTeM
2009
|
| Subjek-subjek: | |
| Capaian Atas Talian: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052721 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052721 http://eprints.utem.edu.my/2070/1/Design_And_Analysis_Of_Multi_LED_Machine_Fixture_-_24_pages.pdf http://eprints.utem.edu.my/2070/2/Design_And_Analysis_Of_Multi_LED_Machine_Fixture.pdf |
| Penanda-penanda: |
Tambah Penanda
Tiada Penanda, Jadilah orang pertama menanda rekod ini!
|
| Ringkasan: | In the 21st century, the LEDs become vast growing parts that replacing the signaling
and lighting devices. The manufactures of LEDs play a major role for supporting
vast amount of LEDs usage in various applications. The preparation of LEDs for
production is important to reduce the total time consumption used. Preparation of
LEDs using manual bending and cutting requires human labor that cost a lot of time
and not reliable in terms on the bending and cutting quality of the lead using pliers
and hand cutters. The main objective of producing this report is to improving the
preparation of LEDs by designing a new concept of fixture that bend and cut multi
LEDs simultaneously powered by pneumatic system and control by PLC. The
progress of the project starts with the producing of 3 type’s fixture concept sketch
and to be evaluated by using the concept screening matrix method. The highest rank
of evaluation will be selected for undergoes actual prototype design using solidworks
design software and also PLC programing. Simulation can be done on solidworks to
determine collision and error. The fabrications of fixture parts will be start base
technical drawing publish using solidworks after the finest prototype simulation is
retrieve. Fixture is then assembles and wired together with pneumatic and PLC
system. Testing and analysis is run on the prototype to evaluate the capabilities of the
fixture. The particular strength of this project is in providing new concept design for
improving manufacturing of LED devices capability in automation industry.
Keyword: Machine fixture, LED, Concept Design, Pneumatic system, PLC. |
|---|