Design And Analysis Of Casting Mold Using CAD Tool
This project presents the design and analysis of casting mold using CAD Tool. The project basically investigated the design parameters for the casting mold and simulated the temperature and pressure on the mold. Turbocharger impeller was selected as the product of the study. Among the various typ...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2010
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063498 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063498 http://eprints.utem.edu.my/2465/1/Design_And_Analysis_Of_Casting_Mold_Using_CAD_Tool_-_24_pages.pdf http://eprints.utem.edu.my/2465/2/Design_And_Analysis_Of_Casting_Mold_Using_CAD_Tool_-_Full_Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project presents the design and analysis of casting mold using CAD Tool. The
project basically investigated the design parameters for the casting mold and
simulated the temperature and pressure on the mold. Turbocharger impeller was
selected as the product of the study. Among the various types of casting techniques,
investment casting process is the most suitable process to produce the turbocharger
impeller. The alternative design of casting mold by investment casting was generated
using CAD software. Concept scoring was prepared in order to select the suitable
design for the investment casting process. Material selection of turbocharger is
Aluminum Silicon Carbide. Stainless steel AISI H13 is selected as the material for
the mold. The parameter for the mold design is included branch, gating, sprue and
runner. Analysis was presented to the mold by using ANSYS simulation tool, in
order to determine the temperature and pressure of the mold. In addition, three case
studies were presented in order to compare the static pressure in different velocity
and temperature of the mold design. The result showed the runner and the branch
size were important to produce the molten metal flow into the mold pattern. As a
result, the design of investment casting mold was proposed. |
|---|