Effect Of Inclined Ball Milling Process On Aluminium Alloy
Milling is one of the fundamental forms of machining operation among several industrial machining processes. The inclination of the cutting tool is one of the important factors that influence the surface finish which become a requirements in a variety of manufacturing industries including the aer...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2010
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063617 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063617 http://eprints.utem.edu.my/2472/1/Effect_Of_Inclined_Ball_Milling_Process_On_Aluminium_Alloy_-_24_pages.pdf http://eprints.utem.edu.my/2472/2/Effect_Of_Inclined_Ball_Milling_Process_On_Aluminium_Alloy_-_Full_Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Milling is one of the fundamental forms of machining operation among several
industrial machining processes. The inclination of the cutting tool is one of the
important factors that influence the surface finish which become a requirements in a
variety of manufacturing industries including the aerospace, die-mold and
automotive industries where complex surfaces and geometries are machined. The
three sectors are stressed most on the quality of the surface finish. Thus, the main
objective for this study is to investigate the effect of the inclined ball end milling to
the scallop height of the Aluminium Alloys surface. Machining parameters involved
in this study are lead angle, tilt angle and step over. The material used to test its
scallop is Aluminium Alloys. Full factorial design of DOE by using the Design
Expert software was applied in order to determine the test run for the experiment. It
also used to analyze the data obtained from the experiments. There were two method
used in this study in order to get the accurate result which are Simulation modeling
using CA TIA software and Experimental machining using the 3-axis CNC milling
machine. The result for both processes showed that the scallop height was decreased
when the tilt angle increased. |
|---|