RF Control Of A Multi-Tasking Vehicle
The main objective of this project is to design and develop a manual control of multi-tasking vacuum to be controlled by Radio Frequency (RF) or wireless communication system. Now, the development of technology made the world to has unlimited borders which make the people lifestyle much easier. In t...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2009
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051595 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051595 http://eprints.utem.edu.my/2953/1/RF_Control_Of_A_Multi-Tasking_Vehicle_-_Ahmad_Khairul_Fazli_b._Nadzri_-_TJ223.P55.A45_2009_24_Pages.pdf http://eprints.utem.edu.my/2953/2/RF_Control_Of_A_Multi-Tasking_Vehicle_-_Ahmad_Khairul_Fazli_b._Nadzri_-_TJ223.P55.A45_2009.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The main objective of this project is to design and develop a manual control of multi-tasking vacuum to be controlled by Radio Frequency (RF) or wireless communication system. Now, the development of technology made the world to has unlimited borders which make the people lifestyle much easier. In this paper, the project will be targeted into how to make a wireless communication to the vehicle that is Radio-Controlled (RC) car by using a Programmable Interface Controller (PIC16F877A) and potentiometer as the joystick. It describes the development of control method that attempt to fulfilled human desire which in simple example, conducting the device by just click the finger on. The project is focusing on the movement of the vehicle in four ways that are reverse, forward, left, and right. It is to make RF function by using encoder to encode the serial data from the PIC of transmitter circuit to the transmitter. Then, the decoder is used to decode the serial data that is received from the receiver and the data is sent to another same PIC of receiver circuit. PIC and RF module plays an important role to fulfill the objective of this project. The last part is the multi-tasking vacuum is attached to the vehicle. The direct current supply of 5Vdc is given in order to run the circuit and the movement of the vehicle is determined by potentiometers that act as the joystick. It comes to firm hardware and software development. The usage of the project is to present such items as the user’s real environment. It can make our job easier and simple to use. |
|---|