PIC-Based Temperature Monitoring System Via CAN Bus
Overall, the purpose of this project is to build a system that can control and monitor temperature in any room, work space, or everywhere that desired via CANbus as a networking solution. This technology introduced CAN-bus in electronic, prove that CAN-bus not only suitable to use in vehicle only...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2010
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063047 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000063047 http://eprints.utem.edu.my/3045/1/PIC-Based_Temperature_Monitoring_System_Via_CAN_Bus_-_24_pages.pdf http://eprints.utem.edu.my/3045/2/PIC-Based_Temperature_Monitoring_System_Via_CAN_Bus_-_Full_Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Overall, the purpose of this project is to build a system that can control and
monitor temperature in any room, work space, or everywhere that desired via CANbus
as a networking solution. This technology introduced CAN-bus in electronic,
prove that CAN-bus not only suitable to use in vehicle only, but it used also can be
commercialized to another technology. Basically, this project development consists
of three parts. The first part is software development. Here used MPLab IDE to solve
programming problem to operate the system. And then second part is layout design,
to trace the overall circuit layout on the PCB, for this part software Proteus is used.
After finish PCB layout design, that layout is printed to etching on the PCB before
continued with drill and assembly board process. When the overall process is done,
the project can be test whether it is function or not. If the project is successfully
function, the user can used this project to everywhere to control and monitor
temperature in the desired places. |
|---|