The Performance Of Carbide Tools When Hard Turning AISI D2 Tool Steel
The machining of hardened steels has been widely investigated by researchers today. CBN is widely used as a cutting tool to machine hardened steel, but the cost of CBN is high. Carbides have high hardness over a wide range of temperatures, high elastic modulus, high thermal conductivity, and low...
Disimpan dalam:
| Pengarang Utama: | |
|---|---|
| Format: | Monograph |
| Diterbitkan: |
UTeM
2009
|
| Subjek-subjek: | |
| Capaian Atas Talian: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052807 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052807 http://eprints.utem.edu.my/3113/1/The_Performance_Of_Carbide_Tools_When_Hard_Turning_AISI_D2_Tool_Steel_-_Nurulatiqah_Abdullah_-_TJ1186.N87_2009_24_Pages.pdf http://eprints.utem.edu.my/3113/2/The_Performance_Of_Carbide_Tools_When_Hard_Turning_AISI_D2_Tool_Steel_-_Nurulatiqah_Abdullah_-_TJ1186.N87_2009.pdf |
| Penanda-penanda: |
Tambah Penanda
Tiada Penanda, Jadilah orang pertama menanda rekod ini!
|
Internet
http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052807http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052807
http://eprints.utem.edu.my/3113/1/The_Performance_Of_Carbide_Tools_When_Hard_Turning_AISI_D2_Tool_Steel_-_Nurulatiqah_Abdullah_-_TJ1186.N87_2009_24_Pages.pdf
http://eprints.utem.edu.my/3113/2/The_Performance_Of_Carbide_Tools_When_Hard_Turning_AISI_D2_Tool_Steel_-_Nurulatiqah_Abdullah_-_TJ1186.N87_2009.pdf