Develop A Rotating Speed Sensor System With Link To Visual Basic.Net
The purpose of this project is to develop an angular speed detection system using a special Infra-Red sensor (IR) where it can detect black and white color and give a small differences voltage signal when the shaft motor was rotating. The black and white color will put at the shaft motor. When th...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2010
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000062956 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000062956 http://eprints.utem.edu.my/3320/1/Develop_a_rotating_Speed_Sensor_System_With_Link_To_Visual_Basic.Net_-_24_pages.pdf http://eprints.utem.edu.my/3320/2/Develop_a_rotating_Speed_Sensor_System_With_Link_To_Visual_Basic.Net_-_Full_Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The purpose of this project is to develop an angular speed detection system
using a special Infra-Red sensor (IR) where it can detect black and white color and
give a small differences voltage signal when the shaft motor was rotating. The black
and white color will put at the shaft motor. When the shaft motor is rotated, the
emitter IR sensor will emit infrared continuously and detect the color changes
depends on setting or fixed time that will be programmed at microcontroller using
PIC (Programmable Interface Controllers) complier software. This colors changing
will generate a differences voltage. Usually, the microcontroller only recognizes
digital input which is 0V and 5V. If the infrared reflected is less, the receiver would
probably produce 2V or 3V and microcontroller is unable to deal with these analog
values. So, the comparator (LM324) is used to solve this problem. By using the
comparator LM324, the output voltage from IR receiver will compare to an input
voltage through a variable resistor. This comparator able to compare for both input
voltage and generate either 0V or 5V where it can connect to microcontroller. Lastly,
the output voltage from microcontroller will display using LCD (Liquid Crystal
Display). The important of my project is to display the measured value on the GUI
Display on computer via Visual Basic.NET. |
|---|