Motion Detection Using Passive Infrared Sensor
This project is about the motion detection using Infra-Red sensor. This project is aim to build a sensor system which is transmit and receive the signal in wirelessly. Besides that, it also acted as an auto power switching system. When the sensor is triggered, the signal will transmit wirelessly...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2011
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000068453 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=graphicFullDisplayRetriever.jsp&szMaterialNo=0000068453 http://eprints.utem.edu.my/3387/1/Motion_Detection_Using_Passive_Infrared_Sensor_-_24_pages.pdf http://eprints.utem.edu.my/3387/2/Motion_Detection_Using_Passive_Infrared_Sensor_-_Full_Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project is about the motion detection using Infra-Red sensor. This project is
aim to build a sensor system which is transmit and receive the signal in wirelessly.
Besides that, it also acted as an auto power switching system. When the sensor is
triggered, the signal will transmit wirelessly to take further action. For this project, I will
relate this sensor system with an auto power light switching system. Which mean when
the sensor is triggered, light in a room will automatically switch ON. In order to transmit
signal wirelessly, this project will used radio frequency module to transmit the signal.
For the controller circuit part, this project will use Programmable Interface Controller
(PIC) to control the circuit, because it is cheaper and easier to program. The objective of
this project is tending to switch ON the light automatically and fan based on the
temperature. Besides that, signal transmit wirelessly can avoid the circuit malfunction
because of wire broken. After done some research from the internet and advice from the
lecturer, tools and equipment are identified to completing the project. Current
temperature will shows on a LCD display. |
|---|