Development Of Portable Single Phase Power Energy Meter Using PIC Module (Hardware)
Single phase power energy meter is a measurement equipment to measure the voltage, current, power usage and the frequency at our home. The design of this project is based on analog devices integrated circuit (IC) that will produce an accurate, reliable and fully functional energy meter with LCD disp...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2009
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051584 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051584 http://eprints.utem.edu.my/3482/1/Development_Of_Portable_Single_Phase_Power_Energy_Meter_Using_Pic_Module_%28_Hardware_%29_Norhapizah_Binti_Ithnin_TJ233.P76.N67_2009_-_24_Pages.pdf http://eprints.utem.edu.my/3482/2/Development_Of_Portable_Single_Phase_Power_Energy_Meter_Using_Pic_Module_%28_Hardware_%29_Norhapizah_Binti_Ithnin_TJ233.P76.N67_2009.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Single phase power energy meter is a measurement equipment to measure the voltage, current, power usage and the frequency at our home. The design of this project is based on analog devices integrated circuit (IC) that will produce an accurate, reliable and fully functional energy meter with LCD display in a single IC. These analog devices also provide excellent performance with less error over an extended current dynamic range. It is because power energy meter are used to measure the active power for our billing at home. Meter with less error will give the efficient measurement of the power usage. With this condition, consumer will pay the bill related to the actual value of their meter. After finished built this meter, it is needed to test whether the design software suitable for the IC or not. If the IC can function, then need to test with the load and make sure LCD will display the measured value. When LCD display the measured value, check the accuracy of the meter. Repair the design if error occurs. |
|---|