Development Of Low Pressure Water Hydraulic System
This thesis presents a study of developing a low pressure water hydraulic system. This study mainly focuses on building up a water hydraulic power unit, design and assembles a low pressure water hydraulic testing system and performs the testing procedures to testing system. The ultimate goal of t...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2009
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo= 0000052402 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo= 0000052402 http://eprints.utem.edu.my/3533/1/Development_Of_Low_Pressure_Water_Hydraulic_System_-_Choi_Yoke_Pooi_-_TJ840.C46_2009_24_Pages.pdf http://eprints.utem.edu.my/3533/2/Development_Of_Low_Pressure_Water_Hydraulic_System_-_Choi_Yoke_Pooi_-_TJ840.C46_2009.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This thesis presents a study of developing a low pressure water hydraulic
system. This study mainly focuses on building up a water hydraulic power unit,
design and assembles a low pressure water hydraulic testing system and performs the
testing procedures to testing system. The ultimate goal of this project is to apply the
low pressure water hydraulic system into an existing Pick and Place Robot. The
combination of water hydraulic application and pneumatic application will be shown
in the robot. Water hydraulic system is not so common in industries sector compare
to pneumatic system and oil hydraulic system. This study may help to explore the
limitation of water hydraulic system and the countermeasure to solve the occurred
problems. A testing system was designed and simulated by using Automation Studio
5.0. From the simulation, the motion of cylinder was shown. This can help in
assembling the testing system correctly and help in time efficiency. Several tests
were done with the aid of the stated testing system. These tests are focused on the
actuator of the system, which is a double acting cylinder. The performance of system
was tested in term of breakaway pressure, internal leakages, speed of stroke and
output force. The results were recorded and analyzed to verify the ability of low
pressure water hydraulic system. As a result, low pressure water hydraulic system is
applicable. However, improvements are needed to make the system more suitable
and efficient. |
|---|