Mobil Robot In Office
The project aim was to a built a robot, controlled by a PIC microcontroller to follow a line completely autonomously and able to bring the weight that be specified. The hardware was based on a block structure with infrared sensors at the front of the vehicle. Their analogue signals were transferr...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2008
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051475 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000051475 http://eprints.utem.edu.my/3721/1/Mobil_Robot_In_Office_Shahril_Bin_Ismail_TJ211.415.S52_2008_24.pdf http://eprints.utem.edu.my/3721/2/Mobil_Robot_In_Office_Shahril_Bin_Ismail_TJ211.415.S52_2008_FULL_TEXT.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The project aim was to a built a robot, controlled by a PIC microcontroller to
follow a line completely autonomously and able to bring the weight that be specified.
The hardware was based on a block structure with infrared sensors at the front of the
vehicle. Their analogue signals were transferred to digital logic with a comparator.
This information used a PIC 16F84A microcontroller to control the movement and
direction of the robot. Output from the controller will tell the motor to run or not. All
parts from hardware to software were mounted on a chassis that build from angle
iron. Batteries of 12V provided the necessary power supply. The electronic circuit
was designed with the computer aided design tool Proteus and executed as a strip
line board. The software development started with the flow chart and finally, the
software was written in assembler language and implemented on the PIC. |
|---|