Design Of Water Level Activated Alarm System For House Water Tank
This project is inspired to monitor and detect water level when the water filled up in house water tank. When water is filled up with the house water tank, water level must be determined. So, this project is required to design and implement a circuit that detects water level and shows by numbers...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2009
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052374 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000052374 http://eprints.utem.edu.my/3725/1/Design_Of_Water_Level_Activated_Alarm_System_For_House_Water_Tank_-_TJ213_.M42_2009.pdf http://eprints.utem.edu.my/3725/2/Design_Of_Water_Level_Activated_Alarm_System_For_House_Water_Tank_-_TJ213_.M42_2009.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project is inspired to monitor and detect water level when the water filled up in
house water tank. When water is filled up with the house water tank, water level must be
determined. So, this project is required to design and implement a circuit that detects water
level and shows by numbers of the LED and the alarm will function when the water is filled
up with the house water tank. The project circuit is also included the specific conductivity
mechanism that would show the levels of different numbers of LED when the water is filled
up with the house water tank. The specific conductivity varies with temperature, volume and
separation distance of the measurement probes. Normally, water tap has a conductance of
about 50 uS /cm and 20K Ohm / cm at 25 ° C. The circuit is drawn out as a block diagram,
and then entered in a schematic using MULTISIM to simulate for correct functionality.
Once the circuit is performed accurately in testing it will be assembled with the actual
components on a breadboard and will be verified using laboratory equipment. |
|---|