The Fabrication Of Porous Ceramic
Porous ceramics are desirable for certain application like filters, humidity and gas sensors. Porosity can be found in almost every types of materials science like -metals, ceramics, polymers, composites, semiconductors and biomaterials.The best well known porous materials is ceramics. In order t...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Published: |
UTeM
2008
|
| Subjects: | |
| Online Access: | http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000048618 http://library.utem.edu.my:8000/elmu/index.jsp?module=webopac-d&action=fullDisplayRetriever.jsp&szMaterialNo=0000048618 http://eprints.utem.edu.my/3785/1/The_Fabrication_Of_Porous_Ceramic_-_24_Pages.pdf http://eprints.utem.edu.my/3785/2/The_Fabrication_Of_Porous_Ceramic_TA455.C43_.M79_2008.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Porous ceramics are desirable for certain application like filters, humidity and gas
sensors. Porosity can be found in almost every types of materials science like -metals,
ceramics, polymers, composites, semiconductors and biomaterials.The best well known
porous materials is ceramics. In order to produce porous ceramic some special technique
will be implemented during the process. Some amount of charcoal will be mix up in the
mixture prior sintering and will be burned out to leave the pores at sintering temperature
of l250°C. There are 8 different sample produces which have charcoal wt% as these, 0
wt%, l wt%, 2 wt%, 3 wfl/o, 4 wt%, 5 wt%, 6 wt%, and 7 wt% respectively. lt was
found that it was proved the more weight percentage (wt %) charcoal was added the
porosity distribution also would increase. The SEM microstructure could describe
briefly the distribution of the porosity inside those pallets and the average size of pores.
There were also several standard testing procedures successfully conducted for porous
ceramic to determine characteristics, properties and behaviors. The diameters, weight
distribution, relative density after sintering (gmm"3
), and the Vickers Hardness value
after sintering were directly proportional to the charcoal wt% composition added. The
relative volume and porosity volume were calculated to detennine exact porosity. |
|---|