Development Of Controller For Front Cover Assembly Station For Flexible Manufacturing System Using PLC
Flexible Manufacturing System (FMS) has been gaining recognition as an industrial revolution in the 21st century. It is universally applied for factory automation, process control and manufacturing systems, and the most common automation controller that being used in FMS is Programmable Logic Con...
Saved in:
| Summary: | Flexible Manufacturing System (FMS) has been gaining recognition as an industrial
revolution in the 21st century. It is universally applied for factory automation, process
control and manufacturing systems, and the most common automation controller that
being used in FMS is Programmable Logic Control (PLC). The output relay built in the
PLC is provided with various internal contacts in addition to the external output contact.
This project present the development of controller an automation station to provide the
mechanism to insert the front cover of LCD monitor to join with body of monitor. This
project being use SIMATIC S7 as a medium controller for controlling FMS assembly
station. The program will be developing to control process sequence and part movement
in LCD assembling process. Ladder diagrams (LD) are chosen as program languages to
develop sequence in PLC. There are four main phase methodology is applied and will be
more presses and absorbed in the methodology flow chart program to ensure the
objectives are achieved. The appropriate instruction control programming of this station
will be recommended as result, then several suggestion will be recommend from the
observation and analysis program developed closely to the project report. |
|---|