Dynamic simulation, modeling, and analysis of an automated sealing and pre-cut plastic bag machine
A mathematical model is an algorithm or set of equations that is combined with a set of data values to represent the significant behavior of a system, process, or phenomenon. The development of a mathematical model for a given real-world system can be a difficult task. In cases where the system'...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Published: |
2003
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1229/ http://eprints.uthm.edu.my/1229/1/24_Pages_from_DYNAMIC_SIMULATION%2C_MODELLING_%26_ANALYSIS_OF_AN_AUTOMATED_SEALING_%26_PRE%2DCUT_PLASTIC_B.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A mathematical model is an algorithm or set of equations that is combined with
a set of data values to represent the significant behavior of a system, process, or
phenomenon. The development of a mathematical model for a given real-world system
can be a difficult task. In cases where the system's dynamics are not well understood,
a series of experiments must be performed to collect data that can then be processed
using various techniques to yield a model of system behavior. This thesis introduced
some of the methods used in the development of mathematical models of real world
systems and phenomena.
Based on the study, the system response of tension plastic for an automated
sealing and pre-cut plastic bag machine will give us the overview of the system
performance. The mathematical model of DC motor are developed and tested with PI
controller model too see the feedback with various values of Kp (proportional gain) and
Ki (Integral gain). The study of characteristics of control system like settling time, riSing
time, steady state error and overshoot has been done. Previous study of this kind of
web tension or unwinder/winder application is mostly used of PI controller. The reason
will be discuss on this thesis implementation. Using Matlab and Simulink as a
simulation software does the experiment.
The system simulator is made for guideline or reference to engineer or machine
design so that they can test their material used in unwinding and winding system
applications. Using Labview as virtual instrument software does the testing experiment. |
|---|