Determination of heat flux intensity distribution and laser absorption rate of AlSl D2 tool steel
The prediction of fluctuated temperature distribution generated by pulsed wave laser in laser assisted micro milling (LAMM) is crucial. The selection of processing parameter by minimize the effect on the processing characteristic is decisive to ensure the machining quality is high. Determining the e...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Published: |
Trans Tech Publications Inc
2014
|
| Subjects: | |
| Online Access: | http://dx.doi.org/10.4028/www.scientific.net/AMM.465-466.730 http://dx.doi.org/10.4028/www.scientific.net/AMM.465-466.730 http://eprints.uthm.edu.my/5401/1/zazuli_mohid_1_U.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The prediction of fluctuated temperature distribution generated by pulsed wave laser in
laser assisted micro milling (LAMM) is crucial. The selection of processing parameter by minimize
the effect on the processing characteristic is decisive to ensure the machining quality is high.
Determining the effect of heat generated in underneath surface is important to make sure that the
cutting tools are able to cut the material with maximum depth of cut and minimum defects in term
of tool wear and tool life. In this study the simulation was carried by using Ansys APDL. In order to
confirm the actual and distribution irradiation of temperature from simulation, an experimental was
done to validate the results. The experiment was conducted by using Nd:YAG laser with
wavelength 1064 nm. |
|---|