FPGA based maximum power point tracking of photovoltaic system

Nowadays, PV cell which is known as a photovoltaic is one of the most important parts in electrical field to convert photo light to voltage and current at the desired output voltage and frequency by using varies control techniques. This project presents design and implementation of FPGA Based Maximu...

முழு விளக்கம்

Saved in:
நூற்பட்டியல் விவரங்கள்
தலைமை எழுத்தாளர்: Diaw, King Eh Sut
வடிவம்: Thesis
வெளியீடப்பட்டது: 2014
பகுதிகள்:
நிகழ்நிலை அணுகல்:http://eprints.uthm.edu.my/5494/
http://eprints.uthm.edu.my/5494/1/KING_DIAW_EH_SUT.pdf
குறியீடுகள்: குறிச்சொல் இணை
குறியீடுகள் இல்லை, இந்த குறிச்சொல்லை முதலில் பதிவு செய்யுங்கள்!
விளக்கம்
தொகுப்பு:Nowadays, PV cell which is known as a photovoltaic is one of the most important parts in electrical field to convert photo light to voltage and current at the desired output voltage and frequency by using varies control techniques. This project presents design and implementation of FPGA Based Maximum Power Point Tracking (MPPT) Controller for Photovoltaic system. The MPPT controller is employed to control and get Maximum Power Point (MPP) from the source. Altera DE1 board devices are used as a controller for the implementation of the MPPT system. The simulation of this FPGA based MPPT controller is designed and implemented using Quartus II VHDL software tools. The results shown, the same signal obtained from Matlab simulink software as compared with Quartus II. It has been observed that the designed system has been successfully extracting the MPP from the pseudo sources used in the simulations. The system has been evaluated in sunny day and partially shaded conditions to analyze the respective outputs in these conditions.