Ceramics pottery fabrication using Plaster of Paris as filler: effect of particle size distribution on porosity and modulus of rupture
This study investigates the influence of Plaster of Paris (POP) mould wastes as filler in manufacturing of ceramic pottery. Five different particle size distributions of the POP waste (25 pm, 36 pm, 45 pm, 63 pm, and 73 pm) have been used as filler. Slip casting method was applied in fabricating cer...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/5876/ http://eprints.uthm.edu.my/5876/1/Ceramics_Pottery_Fabrication_using_Plaster.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study investigates the influence of Plaster of Paris (POP) mould wastes as filler in manufacturing of ceramic
pottery. Five different particle size distributions of the POP waste (25 pm, 36 pm, 45 pm, 63 pm, and 73 pm) have been used as filler. Slip casting method was applied in fabricating ceramic samples. The results showed that, porosity was increased by the additional particle size distribution and
decrease with the strength values. |
|---|