Effect of lanthanum addition on microstructure and hardness as cooling rate function of ADC12 eutectic cast alloy
This paper presents the experimental investigation conducted on ADC12 cast alloy. The main objective of the research is to investigate the effect of 1.5%La addition with different cooling rate on microstructure and hardness value of ADC12 cast alloy. The Ceramic Mold with different thickness dimensi...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
2015
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/6986/ http://eprints.uthm.edu.my/6986/1/MF0008.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper presents the experimental investigation conducted on ADC12 cast alloy. The
main objective of the research is to investigate the effect of 1.5%La addition with different cooling
rate on microstructure and hardness value of ADC12 cast alloy. The Ceramic Mold with different
thickness dimensions was use to obtained different cooling rate. The Si structure became modified
by increase the cooling rate of base alloy. With La addition the Si size observed smaller area than
base alloy when the cooling rate increases. In addition, the higher cooling rate and La addition
improves the hardness specially at lower thickness with La addition |
|---|