Layered manufacturing (LM) of PMC filament by fused deposition modeling (FDM)
This paper presents the melt flow rate (MFR) of an ABS-Copper filament wire for Fused Deposition Modelling (FDM) machine. In this study, the effect MFR of 70% copper tilled in 30% ABS filament material by weight percentage(wt %) was investigated experimentally based on the melting temperature and fe...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Published: |
2015
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/7386/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper presents the melt flow rate (MFR) of an ABS-Copper filament wire for Fused Deposition Modelling
(FDM) machine. In this study, the effect MFR of 70% copper tilled in 30% ABS filament material by weight
percentage(wt %) was investigated experimentally based on the melting temperature and feedrate with
different of the nozzle diameter through the FDM heated liquefied head. The mechanical properties of ABS-Copper
filament through the injection molding machine and Melt Flow Rate by the FDM liquefied head was
investigated in experimental for the mechanical properties and MFR. Based on the result obtained, it was
found that increment of 75% copper filled in ABS filament material in weight percentage (wt.%) increase the
mechanical properties and MFR (velocity and length) of PMC wire filament material through the FDM. It can
be observed that, highest temperature and federate is needed to extrude polymer matrlx composite (PMC)
filament compared to ABS polymer filament material in FDM machine |
|---|