A mathematical model development for the quasi-static lateral collapse of the generalised geometric hollow shapes
The purpose of this research is to develop a general predictive mathematical model of the deformation behaviours for various symmetric geometrical tubes under lateral compression between two flat rigid plates. The mathematical model has been proposed based on rigid, perfectly plastic model and the e...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/7797/ http://eprints.uthm.edu.my/7797/1/MUHAMAD_GHAZALI_BIN_KAMARDAN.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The purpose of this research is to develop a general predictive mathematical model
of the deformation behaviours for various symmetric geometrical tubes under lateral
compression between two flat rigid plates. The mathematical model has been
proposed based on rigid, perfectly plastic model and the energy balance method. The
mathematical models are divided into two cases i.e. 'Case 1' and 'Case 2' based on the
geometrical shapes of the tubes. ‘Case 1’ is for shapes with number of sides 6, 10, 14
and so on such as hexagonal, decagonal and tetra-decagonal tubes. Whereas, ‘Case 2’
is for shapes with number of sides 4, 8, 12 and so on such as square, octagonal and
dodecagonal tubes. The prediction or assumption used in this mathematical model
was that the tubes would deform in phase by phase during plastic deformation. In
order to achieve this purpose, the deformation behaviour and the energy-absorption
performance of various geometrical tube shapes need to be determined. The
geometrical tubes shapes which were studied include square, hexagonal, octagonal,
decagonal, dodecagonal and tetra-decagonal tubes. For that, experimental tests and
finite element analysis (FEA) simulation were conducted to determine the collapse
behaviour of these various symmetrical geometric tubes. First, the quasi-static lateral
compression test was conducted on square and cylindrical tubes experimentally and
by FEA simulation method by using INSTRON Universal Testing Machine and
ABAQUS software respectively. Both results were compared to validate the FEA
simulation results. Then, the validated FEA simulation method was performed for
these various symmetrical geometric tubes to determine their deformation behaviour
iii
and energy-absorption performance and then to validate the newly mathematical model. The comparison between the experiment and FEA simulation had shown good agreement. The simulation study showed that square and symmetric hexagonal tubes deformed with 1 phase of plastic deformation, symmetric octagonal and decagonal tubes deformed with 2 phases of plastic deformation, symmetric dodecagonal and tetra-decagonal tubes deformed with 3 phases of plastic deformation. It was determined that, the general mathematical model had succeeded to predict the deformation behaviour of various symmetric geometrical shapes for both cases but discrepancy occurred for certain specimens due to sudden high peak at the last phase and small angle difference for neighbouring sides. The energy – absorption performance analyses for different types of symmetric geometrical tubes had shown that symmetric hexagonal tube produced the best energy-absorption with high total energy absorption, low yield stress and long stroke without any sudden jump force. |
|---|