Improvement of power quality using unified power quality conditioner

Today’s power systems are so modernized as they consist of networks which are very complex and utilize enormous number of non-linear electrical devices which has led to a distortion in the output sine waveforms of source current and voltage and these devices are considered to be the main source of h...

முழு விளக்கம்

Saved in:
நூற்பட்டியல் விவரங்கள்
தலைமை எழுத்தாளர்: Dawood, Mohammed Ahmed
வடிவம்: Thesis
வெளியீடப்பட்டது: 2016
பகுதிகள்:
நிகழ்நிலை அணுகல்:http://eprints.uthm.edu.my/8793/
http://eprints.uthm.edu.my/8793/1/Mohammed_Ahmed.pdf
குறியீடுகள்: குறிச்சொல் இணை
குறியீடுகள் இல்லை, இந்த குறிச்சொல்லை முதலில் பதிவு செய்யுங்கள்!
விளக்கம்
தொகுப்பு:Today’s power systems are so modernized as they consist of networks which are very complex and utilize enormous number of non-linear electrical devices which has led to a distortion in the output sine waveforms of source current and voltage and these devices are considered to be the main source of harmonics and power factor poorness. This project concentrates on the design and application of three-phase Unified Power Quality Conditioner (UPQC) by using both partial integrated (PI) and fuzzy logic controller (FLC) to minimize the harmonics which are created by non-linear loads besides improving the power factor. Matlab/Simulink tool was used for modeling and obtaining the results, line voltage, source current and power factor. These results were verified before and after using the filter. The achieved results were within the recommended IEEE-519 standard.