Efficient Oxidative Desulfurization (ODS) of commercial diesel with TBHP under mild conditions catalyzed by polymolybdates supported on Al2O3
Due to the low specifications for sulfur content in diesel, a lot of research work are been conducted to develop alternative method for desulfurization. Catalytic oxidative desulfurization (Cat-ODS) has been found to be an alternative method to replace a conventional method which is hydrodesulfuriza...
à®®à¯à®´à¯ விளகà¯à®•à®®à¯
Saved in:
| தலைமை எழà¯à®¤à¯à®¤à®¾à®³à®°à¯à®•à®³à¯: | , , |
|---|---|
| வடிவமà¯: | Conference or Workshop Item |
| வெளியீடபà¯à®ªà®Ÿà¯à®Ÿà®¤à¯: |
2013
|
| பகà¯à®¤à®¿à®•à®³à¯: | |
| நிகழà¯à®¨à®¿à®²à¯ˆ அணà¯à®•à®²à¯: | http://eprints.utm.my/39614/ |
| கà¯à®±à®¿à®¯à¯€à®Ÿà¯à®•à®³à¯: |
கà¯à®±à®¿à®šà¯à®šà¯Šà®²à¯ இணை
கà¯à®±à®¿à®¯à¯€à®Ÿà¯à®•à®³à¯ இலà¯à®²à¯ˆ, இநà¯à®¤ கà¯à®±à®¿à®šà¯à®šà¯Šà®²à¯à®²à¯ˆ à®®à¯à®¤à®²à®¿à®²à¯ பதிவ௠செயà¯à®¯à¯à®™à¯à®•à®³à¯!
|
| தொகà¯à®ªà¯à®ªà¯: | Due to the low specifications for sulfur content in diesel, a lot of research work are been conducted to develop alternative method for desulfurization. Catalytic oxidative desulfurization (Cat-ODS) has been found to be an alternative method to replace a conventional method which is hydrodesulfurization.New catalyst formulation using tert-butyl hydroperoxide polymolybdate based catalyst system was investigated in this research utilizing tert-butyl hydroperoxide (TBHP) as oxidant and dimethylformamide (DMF) as solvent for extraction. A series of polymolybdate supported alumina catalysts were prepared using wet impregnation method, ageing at ambient room temperature for 24 hours and followed by calcination process. A commercial diesel with 440 ppmw of total sulfur was employed to evaluate the elimination of sulfur compounds. Besides, the percentage of sulfur removal was measured by gas chromatography-flame photometric detector (GC-FPD). The sulfur content in commercial diesel was successfully reduced from 440 ppmw to 35 ppmw under mild condition followed by solvent extraction. From catalytic testing, Mo-Al2O3 calcined at 500°C was revealed as the most potential catalyst which gave 92% of sulfur removal. |
|---|