Design of phased arrays of series-fed patch antennas with reduced number of the controllers for 28-GHzmm-wave applications
New modified 2 x 2 and 3 x 3 series-fed patch antenna arrays with beam-steering capability are designed and fabricated for 28-GHz millimeter-wave applications. In the designs, the patches are connected to each other continuously and in symmetric 2-D format using the high-impedance microstrip lines....
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/69157/ http://eprints.utm.my/69157/ http://eprints.utm.my/69157/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | New modified 2 x 2 and 3 x 3 series-fed patch antenna arrays with beam-steering capability are designed and fabricated for 28-GHz millimeter-wave applications. In the designs, the patches are connected to each other continuously and in symmetric 2-D format using the high-impedance microstrip lines. In the first design, 3-D beam-scanning range of +/- 25 degrees and good radiation and impedance characteristics were attained by using only one phase shifter. In the second one, a new mechanism is introduced to reduce the number of the feed ports and the related phase shifters (from default number 2N to the reduced number N 1 in the serial feed (here N = 3) and then the cost, complexity, and size of the design. Here, good scanning performance of a range of +/- 20 degrees, acceptable sidelobe level, and gain of 15.6 dB are obtained. These features allow to use additional integrated circuits to improve the gain and performance. A comparison to the conventional array without modification is done. The measured and simulated results and discussions are presented. |
|---|