Control of a gantry crane using input-shaping schemes with distributed delay

This paper presents simulation and real-time implementation of input-shaping schemes with a distributed delay for control of a gantry crane. Both open-loop and closed-loop input-shaping schemes are considered. Zero vibration and zero vibration derivative input shapers are designed for performance co...

முழு விளக்கம்

Saved in:
நூற்பட்டியல் விவரங்கள்
தலைமை எழுத்தாளர்கள்: Mohammad, Javad Maghsoudi, Mohamed, Zaharuddin, M., O. Tokhi, Husain, Abdul Rashid, Zainal Abidin, Mohamad Shukri
வடிவம்: கட்டுரை
வெளியீடப்பட்டது: Sage Publications Ltd 2017
பகுதிகள்:
நிகழ்நிலை அணுகல்:http://eprints.utm.my/66215/
http://eprints.utm.my/66215/
http://eprints.utm.my/66215/
குறியீடுகள்: குறிச்சொல் இணை
குறியீடுகள் இல்லை, இந்த குறிச்சொல்லை முதலில் பதிவு செய்யுங்கள்!
விளக்கம்
தொகுப்பு:This paper presents simulation and real-time implementation of input-shaping schemes with a distributed delay for control of a gantry crane. Both open-loop and closed-loop input-shaping schemes are considered. Zero vibration and zero vibration derivative input shapers are designed for performance comparison in terms of trolley position response and level of sway reduction. Simulation and experimental results have shown that all the shapers are able to reduce payload sway significantly while maintaining satisfactory position response. Investigations with different cable lengths that correspond to ±20% changes in the sway frequency have shown the distributed delay-based shaper has asymmetric robustness behaviour. The shaper provides highest robustness for the case of 20% increase in the sway frequency but lower robustness for the case of 20% decrease. However, other schemes give symmetric robustness behaviour for both cases.